1. Home
  2. Surface disinfectant
  3. PATHOGEL

PATHOGEL

  1. Sprinkle the polymer powder over the spill.

  2. Wait a few minutes as it absorbs the liquid.

  3. Scoop up and discard the gelled mass.

INSTRUTIONS OF USE

  1. Preparation: Wear PPE (gloves, eye protection, impervious apron). Ensure adequate ventilation.

  2. Application:
    ➞ Sprinkle powder generously over the entire blood spill.
    ➞ Allow gel formation (absorbed spill solidifies).

  3. Disposal:
    ➞ Scoop solidified material into a biohazard bag/container.
    ➞ Clean residue with water; collect runoff for proper disposal.
    ➞ Never dispose in drains/sewers (toxic to aquatic life).

  4. Decontamination: Wash tools/surfaces with water. Launder contaminated clothing before reuse.

AREAS OF APPLICATION

Healthcare facilities (hospitals, clinics).
Laboratories.
Emergency response scenes.

FEATURES & BENEFTS

Feature Benefit
Rapid Absorption Quickly contains liquid spills, minimizing spread.
Disinfectant Action Troclosene sodium releases chlorine, killing bloodborne pathogens.
High Solubility Easily mixes with water for effective cleanup.
Solid Form Portable and stable for storage.
Non-Irritating (Skin) Safe for dermal contact with proper handling (per animal studies).

COMPOSITION

  • Primary Ingredient: Troclosene Sodium (100%, CAS 2893-78-9).

  • Form: Solid powder with a pungent odor.

  • Solubility: Highly soluble in water.

  • pH: 5–6 (at 1% concentration).

PRECAUTIONS OF USE

    • Eye Contact: Causes severe irritation. Rinse immediately with water for ≥15 mins; seek medical help.

    • Inhalation: Avoid dust/aerosols. Use respirator in poorly ventilated areas. Move to fresh air if exposed.

    • Skin Contact: Rinse thoroughly with water; remove contaminated clothing.

    • Ingestion: Do NOT induce vomiting. Seek immediate medical attention.

    • Storage: Keep container tightly closed in a cool, ventilated area. Away from heat/open flames.

    • Environmental Hazard: Highly toxic to aquatic organisms. Contain spills; prevent runoff into waterways.

    • Fire Hazard: Use dry sand, CO₂, or foam (not water alone). Isolate area; toxic fumes (CO, NOₓ) may release.

PACKING TYPES

250 gm

PRODUCT CODE

7001