How to Use:
-
Sprinkle the polymer powder over the spill.
-
Wait a few minutes as it absorbs the liquid.
-
Scoop up and discard the gelled mass.
PATHOGEL
Storage Conditions
• Store at room temperature (15–25°C or 59–77°F)
• Keep it away from direct sunlight.
• Store in a dry place.
• Exposure to organic solvents, oils, or strong acids/bases.
• These can chemically damage the polymer.
Net: 250 gm.
Precautions When Using Superabsorbent Polymer (SAP):
1. Personal Safety
-
Avoid inhaling the powder.
Fine SAP dust can irritate the respiratory tract. If handling large quantities, consider wearing a dust mask or respirator. -
Wear gloves if you have sensitive skin — although SAP is generally non-toxic, it can dry out or irritate skin with prolonged contact.
-
Avoid contact with eyes.
If it gets in your eyes, rinse thoroughly with water and seek medical advice if irritation continues.
2. Keep Away from Heat & Flames
-
SAP is not flammable, but excessive heat can break it down.
-
Don’t expose it to open flames, stoves, or high-temp storage (e.g., near a furnace).
3. Avoid Premature Exposure to Moisture
-
Keep it sealed until you’re ready to use it. Moisture in the air or on hands can activate it and reduce its effectiveness.
-
Once hydrated, it can become very slippery — spilled hydrated gel is a slip hazard on smooth floors.
4. Cleaning Up
-
Never flush hydrated SAP down drains or toilets — it can clog plumbing.
-
Scoop or wipe up with paper towels or absorbent material, then discard in regular trash.
5. Child & Pet Safety
-
While it’s non-toxic, the dry powder can be a choking hazard or cause digestive issues if swallowed.
-
Keep it out of reach of children and animals, especially in its dry form.
6. Chemical Interactions
-
Don’t mix SAP with strong acids, bases, or oils — it won’t absorb them and may degrade.
-
It’s also ineffective with salty water (like seawater) — sodium ions reduce its absorption ability.
PATHOGEL
